상품명 | Eltec Pyroelectric Detectors (Sensors) |
---|---|
원산지 | Switzerland |
판매가 | 메일 상담 |
수량 | |
관련상품수 | 0 |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|---|---|
총상품금액(수량) 0 |
상품명 | Eltec Pyroelectric Detectors (Sensors) |
---|---|
원산지 | Switzerland |
판매가 | 메일 상담 |
수량 | |
관련상품수 | 0 |
고도의 품질과 정밀성을 요구하는 사용자님을 위한 세계 최고의 제품
Eltec Pyroelectric Detectors are thermal detectors and respond almost linearly to a very wide spectrum of radiation. The sensing element is a thin pyroelectric lithium-tantalate crystal, that is suspended in air for maximum sensitivity and low frequency response.
A detector is specified by the Model Number (such as 400)
and a Window (such as 1) making 400-1
For window information, refer to our Windows and Filter Page or to the Selector Guide.
Standard Product | Special Product | Available on Request | |
Eltec Model 400 contains only Sensing Element
|
|||
Eltec Model 400-0. No window, for full spectrum. Eltec Model 400-1 Germanium window, IR from 1.5 to 20 microns Eltec Model 400-4 Sapphire window, UV 0.2 to IR 5 microns Eltec Model 400-27 CaFl window, UV 0.12 to IR 10 microns |
Eltec Model 400-X All other window options "X". Refer to the optical filter page or our Filter Selector Guide for transmission data. |
Please inquire ! Custom made products may cause additional cost. |
|
Model 404 Series Laboratory Grade Detectors with VM/CM Amplifier
|
|||
Model 404-X Most universal VM/CM detector. Model 404VM-X only for VM operation. Model 404CM-X only for CM operation. Specify window "X". |
|||
Model 406 Series Industrial Single Element Detectors with FET Amplifier For very low frequency (0.1 to 5 Hz) temperature sensing and object detection. |
|||
Model 406-X A very universal detector. Use only with windows that block visible light. |
Model 406M39-X with higher gain FET amplifier. |
||
Model 481-X in small TO18 package for compact sensor heads. Specify window "X". |
|||
Model 406 Series. Optimized for Flame Detection and Gas Analysis in the 5 to 10 Hz Frequency range. Due to the lack of low frequency response, they deliver a more stable output signal. Built in FET amplifier. Available with our gas filters, broadband windows or customer supplied filters. |
|||
Model 40612-X 2x2mm sensing element for focussed systems. Model 40623-X 2.5x2.5mm sensing element for non focussed systems |
Model 406MBK-X optimized for 20 Hz. Model 406MBN-X with brazed hermetic sapphire window. |
||
Model 441 Series High Gain Single Element Detectors These detectors include an amplifier with a gain of appx. 100. This eliminates the need for electronics close to the detector. They can be connected directy to a cable. Ideal for industrial sensors. Wide operating temperature range. |
|||
Model 441-X Industrial temperature sensing. Model 441M34-X Fast version of 441. Choice of windows ("X") |
|||
Model 407 Series Thermally Compensated Single Element Detectors These detectors have a compensating element behind the sensing element, that reduces the effect of ambient temperature changes by a factor of appx. 10. This is very practical in many industrial applications, but they do not reach the performance (detectivity) of single element devices. |
|||
Model 407-X A very universal detector. Use only with windows that block visible light. With FET amplifier. Model 405-X with higher gain FET amplifier. |
Model 407M56-43 CO2 gas sensor with hermetic brazed sapphire window. |
||
Model 407M24-X 3mm square sensing element. Model 405M6-X 2.5mm square sensing element and higher gain FET amplifier. |
|||
Model 482-X in small TO18 package for compact sensor heads. Specify window "X". |
|||
Model 446 Series High Gain Thermally Compensated Single Element These detectors include an amplifier with a gain of appx. 100 and have a compensating element. This eliminates the need for electronics close to the detector. They can be connected directy to a cable. Ideal for industrial sensors. Wide operating temperature range. |
|||
Model 446M2-3 Industrial hot object and hot glue detection. Fast response. |
Model 446-X Wide frequency range. Choice of windows ("X") Model 446M11-X extended temperature range version |
Model 446M10-X with hermetic brazed sapphire window. |
|
Dual Element Detectors (Differential) 2 sensing elements side-by-side connected in parallel-opposed (differential) mode. These detectors need optics (focussing lens or mirror).Typical application is motion detection (alarm systems). There is no output from background radiation. |
|||
Model 5192-3 for professional alarm systems. Internal FET amplifier. Model 429-3 same but 2 separate outputs. Two internal FET amplifiers. |
Model 447-3 with high gain internal amplifier. The choice for professional security systems. Wide temperature range. Model 442-3 same but increased sensitivity (black elements) |
Eltec does not manufacture low cost dual detectors for consumer grade light switches and alarms. | |
Twin Channel, Optically Isolated Dual Wavelength Gas Detectors with FET amplifier | |||
Model 459-X Narrow spacing. Model 479-X Wide spacing. Model 479M1-X Higher gain version |
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)
※ 상품구입후 단순변심은 환불되지 않습니다.
A/S 안내
- 전자키트 및 센서 에 대하여 조립시 A/S 및 환불이 되지 않습니다.
- 전자키트 초기 불량일 경우 100% A/S 조치해 드립니다.
- 완제품 의 경우 외산의 제품이 대부분이여서 한달간 무상수리해드립니다.(국산품 제외)
- 완제품 국산제품의 경우 제조사의 A/S 조항을 따릅니다.
051-465-7774
AM 9:00 ~ PM 18:00
LUNCH PM 12:00 ~ PM 13:00
CLOSED토요일, 일요일, 법정공휴일